Aivee Edition one MTB rear hub endcaps

Caps for rear Edition One SL centerlock &...

12mm Caps for front Edition One SL centerlock...

Pair of anodized black caps 12*100mm for edition One SL CL hub. (Centerlock only). Please check that your hub is compatible before ordering please. You can send us your hub serial number for checking.

Aivee MT3 rear hub endcaps

End-caps are different either if you are using a Shimano® freehub body or a Sram XD freehub body Shimano®: 10mm QR: KIT-50 12x135mm: KIT-50 12x142mm: KIT-50 Sram® XD: 10mm QR:  12x135mm: 12x142mm:

Aivee MP2, MP4 rear hub endcaps

Rear caps for Edition One road

A pair of left and right caps for your Edition One Road hub. 9x130 QR Made of black anodized aluminium. Compatible with straight pull and j-bend model. Not compatible with disc version.

Aivee MT6, MP,6 Edition One HD rear hub endcaps

You cannot modify a Boost hub into non-boost. Reverse is also impossible.

Aivee MP2, MP4, MT6, MP,6 Edition One HD...

Available for: 9mm QR: KIT-5141 12x100mm: KIT-5142 15x100mm: KIT-5140

Screw and nut kit for Lefty 50 et 60 hubs.

The nut can be tightened by screwing anti-clockwise. You need to use a Shimano cassette tool.

Caps for front Edition One SL centerlock &...

Torque caps kit Classic hub

Will fit the DT swiss centerlock nut but not the Shimano which had a smaller inner diameter.

Aivee MT6 front hub endcaps QR

Available for: 9mm QR: KIT-5023 15x100mm: KIT-5025 20x110mm: KIT-5026

Aivee MT5 front hub endcaps

Available for: 9mm QR: KIT-5018  15x100mm: KIT-5020 20x110mm: KIT-5021

Pair of adaptor to 12mm (from 15mm axle)

With this pair of adaptor you can use your 15mm hub from your mtb (for example 15x100) and use it on your road or gravel bike (12x100). Would also work to transform a hub 15x110 to 12x110. (New...

Front caps for Edition One road

A pair of left and right caps for your Edition One Road hub. 9x100 QR Made of black anodized aluminium. compatible with stright pull and j-bend model. Not compatible with disc version.

Aivee MT3 front hub endcaps

Available for: 9mm QR: KIT-5023 15x100mm: KIT-5025 20x110mm: KIT-5026

Aivee Edition one MTB front hub endcaps